Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 361
:SAVE:IMAGe:AREA
(see page 658)
Query Syntax
:SAVE:IMAGe:AREA?
The :SAVE:IMAGe:AREA? query returns the selected image area. If the
:SAVE:IMAGe:FORMat is TIFF, the area is GRAT (graticule). Otherwise, it is
SCR (screen).
Return Format
<area><NL>
<area> ::= {GRAT | SCR}
See Also • "Introduction to :SAVE Commands" on page 358
• ":SAVE:IMAGe[:STARt]" on page 360
• ":SAVE:IMAGe:FACTors" on page 362
• ":SAVE:IMAGe:FORMat" on page 363
• ":SAVE:IMAGe:INKSaver" on page 364
• ":SAVE:IMAGe:PALette" on page 365
To Next Page
Loading...
