Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

234 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:FUNCtion:GOFT:SOURce1
(see page 658)
Command Syntax
:FUNCtion:GOFT:SOURce1 <value>
<value> ::= CHANnel<n>
<n>::={1|2|3|4}for4chmodels
<n> ::= {1 | 2} for 2ch models
The :FUNCtion:GOFT:SOURce1 command selects the first input channel for
the g(t) source that can be used as the input to the FFT, INTegrate,
DIFFerentiate, or SQRT functions.
Query Syntax
:FUNCtion:GOFT:SOURce1?
The :FUNCtion:GOFT:SOURce1? query returns the current selection for the
first input channel for the g(t) source.
Return Format
<value><NL>
<value> ::= CHAN<n>
<n>::={1|2|3|4}forthe4chmodels
<n> ::= {1 | 2} for the 2ch models
See Also • "Introduction to :FUNCtion Commands" on page 230
• ":FUNCtion:GOFT:SOURce2" on page 235
• ":FUNCtion:GOFT:OPERation" on page 233

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English