Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Obsolete and Discontinued Commands 7
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 567
Discontinued
Parameters
Some previous oscilloscope queries returned control setting values of OFF
and ON. The InfiniiVision 5000 Series oscilloscopes only return the
enumerated values 0 (for off) and 1 (for on).
DISPlay:ROW none
DISPlay:TEXT none
FUNCtion:MOVE none
FUNCtion:PEAKs none
HARDcopy:ADDRess none Only parallel printer port is
supported. GPIB printing not
supported
MASK none All commands discontinued,
feature not available
SYSTem:KEY none
TEST:ALL *TST (Self Test) (see page 120)
TRACE subsystem none All commands discontinued,
feature not available
TRIGger:ADVanced subsystem Use new GLITch, PATTern, or
TV trigger modes
TRIGger:TV:FIELd :TRIGger:TV:MODE (see
page 481)
TRIGger:TV:TVHFrej
TRIGger:TV:VIR none
VAUToscale none
Discontinued Command Current Command Equivalent Comments

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English