Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

What's New 1
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 27
Changed
Commands
Obsolete
Commands
Command Differences
:BLANk (see page 130) Now, you can also use this command with the
serial decode bus.
:DIGitize (see page 132) Now, you can also use this command with the
serial decode bus.
:STATus (see page 159) Now, you can also use this command with the
serial decode bus.
:TRIGger:MODE (see page 417) You can now select the serial triggering modes.
:VIEW (see page 162) Now, you can now use this command with the
serial decode bus.
:WAVeform:SOURce (see page 521) Now, you can also use this command with the
serial decode bus.
Obsolete Command Current Command Equivalent Behavior Differences
:HARDcopy:FILename (see
page 580)
:RECall:FILename (see
page 352)
:SAVE:FILename (see
page 352)
:HARDcopy:FORMat (see
page 581)
:HARDcopy:APRinter (see
page 248)
:SAVE:IMAGe:FORMat (see
page 363)
:SAVE:WAVeform:FORMat
(see page 370)
:HARDcopy:IGColors (see
page 583)
:HARDcopy:INKSaver (see
page 251)
:HARDcopy:PDRiver (see
page 584)
:HARDcopy:APRinter (see
page 248)

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English