Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 319
:MTESt:OUTPut
<signal> (see
page 336)
:MTESt:OUTPut? (see
page 336)
<signal> ::= {FAIL | PASS}
:MTESt:RMODe <rmode>
(see page 337)
:MTESt:RMODe? (see
page 337)
<rmode> ::= {FORever | TIME |
SIGMa | WAVeforms}
:MTESt:RMODe:FACTion:
PRINt {{0 | OFF} | {1
| ON}} (see page 338)
:MTESt:RMODe:FACTion:
PRINt? (see page 338)
{0 | 1}
:MTESt:RMODe:FACTion:
SAVE {{0 | OFF} | {1
| ON}} (see page 339)
:MTESt:RMODe:FACTion:
SAVE? (see page 339)
{0 | 1}
:MTESt:RMODe:FACTion:
STOP {{0 | OFF} | {1
| ON}} (see page 340)
:MTESt:RMODe:FACTion:
STOP? (see page 340)
{0 | 1}
:MTESt:RMODe:SIGMa
<level> (see
page 341)
:MTESt:RMODe:SIGMa?
(see page 341)
<level> ::= from 0.1 to 9.3 in
NR3 format
:MTESt:RMODe:TIME
<seconds> (see
page 342)
:MTESt:RMODe:TIME?
(see page 342)
<seconds> ::= from 1 to 86400 in
NR3 format
:MTESt:RMODe:WAVeform
s <count> (see
page 343)
:MTESt:RMODe:WAVeform
s? (see page 343)
<count> ::= number of waveforms
in NR1 format
:MTESt:SCALe:BIND {{0
| OFF} | {1 | ON}}
(see page 344)
:MTESt:SCALe:BIND?
(see page 344)
{0 | 1}
:MTESt:SCALe:X1
<x1_value> (see
page 345)
:MTESt:SCALe:X1? (see
page 345)
<x1_value> ::= X1 value in NR3
format
:MTESt:SCALe:XDELta
<xdelta_value> (see
page 346)
:MTESt:SCALe:XDELta?
(see page 346)
<xdelta_value> ::= X delta value
in NR3 format
:MTESt:SCALe:Y1
<y1_value> (see
page 347)
:MTESt:SCALe:Y1? (see
page 347)
<y1_value> ::= Y1 value in NR3
format
:MTESt:SCALe:Y2
<y2_value> (see
page 348)
:MTESt:SCALe:Y2? (see
page 348)
<y2_value> ::= Y2 value in NR3
format
Table 54 :MTESt Commands Summary (continued)
Command Query Options and Query Returns

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English