Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Setting Up 2
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 37
Otherwise, if the instrument is not on the same subnet, click Add
Address.
i In the next dialog, select either Hostname or IP address, and
enter the oscilloscope's hostname or IP address.
ii Click Test Connection.

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English