Agilent Technologies InfiniiVision 5000 Series

Commands A-Z 6
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 561
X • X1, ":MTESt:SCALe:X1" on page 345
• X1Position, ":MARKer:X1Position" on page 259
• X1Y1source, ":MARKer:X1Y1source" on page 260
• X2Position, ":MARKer:X2Position" on page 261
• X2Y2source, ":MARKer:X2Y2source" on page 262
• XDELta Commands:
• ":MARKer:XDELta" on page 263
• ":MTESt:AMASk:XDELta" on page 326
• ":MTESt:SCALe:XDELta" on page 346
• XINCrement, ":WAVeform:XINCrement" on page 529
• XMAX, ":MEASure:XMAX" on page 316
• XMIN, ":MEASure:XMIN" on page 317
• XORigin, ":WAVeform:XORigin" on page 530
• XREFerence, ":WAVeform:XREFerence" on page 531
Y • Y1, ":MTESt:SCALe:Y1" on page 347
• Y1Position, ":MARKer:Y1Position" on page 264
• Y2, ":MTESt:SCALe:Y2" on page 348
• Y2Position, ":MARKer:Y2Position" on page 265
• YDELta Commands:
• ":MARKer:YDELta" on page 266
• ":MTESt:AMASk:YDELta" on page 327
• YINCrement, ":WAVeform:YINCrement" on page 532
• YORigin, ":WAVeform:YORigin" on page 533
• YREFerence, ":WAVeform:YREFerence" on page 534