Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Commands Quick Reference 4
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 91
:WAVeform:SOURce:SUBS
ource <subsource>
(see page 525)
:WAVeform:SOURce:SUBS
ource? (see page 525)
<subsource> ::= {{NONE | RX} |
TX}
n/a :WAVeform:TYPE? (see
page 526)
<return_mode> ::= {NORM | PEAK |
AVER | HRES}
:WAVeform:UNSigned
{{0 | OFF} | {1 |
ON}} (see page 527)
:WAVeform:UNSigned?
(see page 527)
{0 | 1}
:WAVeform:VIEW <view>
(see page 528)
:WAVeform:VIEW? (see
page 528)
<view> ::= {MAIN}
n/a :WAVeform:XINCrement?
(see page 529)
<return_value> ::= x-increment
in the current preamble in NR3
format
n/a :WAVeform:XORigin?
(see page 530)
<return_value> ::= x-origin
value in the current preamble in
NR3 format
n/a :WAVeform:XREFerence?
(see page 531)
<return_value> ::= 0
(x-reference value in the current
preamble in NR1 format)
n/a :WAVeform:YINCrement?
(see page 532)
<return_value> ::= y-increment
value in the current preamble in
NR3 format
n/a :WAVeform:YORigin?
(see page 533)
<return_value> ::= y-origin in
the current preamble in NR3
format
n/a :WAVeform:YREFerence?
(see page 534)
<return_value> ::= y-reference
value in the current preamble in
NR1 format
Table 28 :WAVeform Commands Summary (continued)
Command Query Options and Query Returns

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English