(6) Put the end cap in the crimp tool.
Make sure that:
• The closed end of the end cap is against the crimp tool locator
• The end cap is correctly aligned in the crimp tool dies
• If it is applicable, the color of Ring B of the end cap is the same as the color code of the
crimp tool die; refer to Figure 1 and Figure 2.
TEMPERATURE GRADE D AND A END CAPS
Figure 1
ASSEMBLY OF END CAPS
707, 727-787
STANDARD WIRING PRACTICES MANUAL
20-30-16
Page 6
Oct 15/2015D6-54446
ECCN 9E991 BOEING PROPRIETARY - See title page for details
To Next Page
Loading...
