Send document comments to nexus7k-feedback-doc@cisco.com
2-451
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM Messages
Error Message PIM-3-PT_DEL Format: Couldn't delete %s from local PT
Explanation PIM failed to delete the local route-table entry.
Parameters: Address ...
Recommended Action No action is required.
Error Message PIM-3-PTHREAD_CREATE Format: Couldn't create thread %s
Explanation PIM process failed to create a task thread.
Parameters: Thread Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-RDLOCK_ASSERT Format: %s:%d: Assert, read-lock not acquired
Explanation Caller Failed to get PIM Shared Memory read lock
Parameters: Function Name, Line ...
Recommended Action No action is required.
Error Message PIM-3-RESERVE_LIMIT Format: Exceeded reserve-limit for VRF %s -
dropping
Explanation Exceeded the reserve-limit for VRF
Parameters: VRF ...
Recommended Action No action is required.
Error Message PIM-3-RESTART_REASON Format: PIM process has restarted, restart
reason: %s\n
Explanation PIM is restoring the routes it had added in previous instance.
Parameters: Restart Reason ...
Recommended Action No action is required.
Error Message PIM-3-RLIMIT Format: Couldn't set PIM data segment size to %lu
Explanation PIM process could not set a memory resource limit, exiting.
Parameters: Segment Size ...
Recommended Action No action is required.
Error Message PIM-3-ROUTE_LOOKUP Format: Couldn't find PIM route %s
Explanation PIM failed to find entry in the local route-table.
Parameters: Address ...
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
