Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-464
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM6 Messages
Error Message PIM6-3-PIM6_INIT Format: PIM6 init failed: %s
Explanation PIM6 process initialization has failed.
Parameters: Component Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-POLICY_INVALID_BINDACK Format: Invalid RPM bind ack in %s
Explanation PIM6 received invalid policy response from RPM.
Recommended Action No action is required.
Error Message PIM6-3-POLICY_INVALID_TYPE Format: Invalid RPML type %d in %s
Explanation PIM6 received invalid policy-type from RPM.
Recommended Action No action is required.
Error Message PIM6-3-PSS_FAILED Format: PSS operation %s failed
Explanation PIM6 process failed in a PSS operation.
Parameters: Operation Name ...
Recommended Action No action is required.
Error Message PIM6-3-PT_ADD Format: Couldn't add %s to local PT
Explanation PIM6 failed to update the local route-table entry.
Parameters: Addresses ...
Recommended Action No action is required.
Error Message PIM6-3-PT_DEL Format: Couldn't delete %s from local PT
Explanation PIM6 failed to delete the local route-table entry.
Parameters: Address ...
Recommended Action No action is required.
Error Message PIM6-3-PTHREAD_CREATE Format: Couldn't create thread %s
Explanation PIM6 process failed to create a task thread.
Parameters: Thread Name ...
Recommended Action Dump core, and and and then restart component.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English