Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-465
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM6 Messages
Error Message PIM6-3-RDLOCK_ASSERT Format: %s:%d: Assert, read-lock not acquired
Explanation Caller Failed to get PIM6 Shared Memory read lock
Parameters: Function Name, Line ...
Recommended Action No action is required.
Error Message PIM6-3-RESERVE_LIMIT Format: Exceeded reserve-limit for VRF %s -
dropping
Explanation Exceeded the reserve-limit for VRF
Parameters: VRF ...
Recommended Action No action is required.
Error Message PIM6-3-RESTART_REASON Format: PIM6 process has restarted, restart
reason: %s\n
Explanation PIM6 is restoring the routes it had added in previous instance.
Parameters: Restart Reason ...
Recommended Action No action is required.
Error Message PIM6-3-RLIMIT Format: Couldn't set PIM6 data segment size to %lu
Explanation PIM6 process could not set a memory resource limit, exiting.
Parameters: Segment Size ...
Recommended Action No action is required.
Error Message PIM6-3-ROUTE_LOOKUP Format: Couldn't find PIM6 route %s
Explanation PIM6 failed to find entry in the local route-table.
Parameters: Address ...
Recommended Action No action is required.
Error Message PIM6-3-SETSOCKOPT Format: setsockopt() on %s failed: %s
Explanation PIM6 failed in UDP socket operation. Auto-RP will not work.
Parameters: Message String Error String ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-SETUP_ROUTE Format: Couldn't setup PIM6 route %s in %s
Explanation PIM6 failed to install route in the local route-table.
Parameters: Addresses, Function Name ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English