Send document comments to nexus7k-feedback-doc@cisco.com
2-466
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM6 Messages
Error Message PIM6-3-SHARED_DB_PUB_INIT Format: Could not do shared database
publisher initialization for interfaces rc=0x%x [%s]
Explanation The system is unable to do shared db publisher initialization
Parameters: Status Error, Syserror string ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-SHUTDOWN_FM Format: FM could not shut down PIM6 process
Explanation FM could not shut down PIM6 process.
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-SLAB_ALLOC Format: Slab alloc of type %s failed in %s
Explanation PIM6 process failed to allocate Slab memory.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM6-3-SLAB_CREATE Format: Slab alloc of type %s failed
Explanation PIM6 process failed to allocate Slab memory.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM6-3-SM_CREATE Format: Couldn't create shm segment %s
Explanation PIM6 process failed to initialize shared memory resource.
Parameters: Shared Memory Segment Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-SMALLOC Format: Shared mem malloc (%lu) failed in %s
Explanation PIM6 process is out of free shared memory.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM6-3-SOCKET Format: socket() for %s failed: %s
Explanation PIM6 failed to obtain UDP socket. Auto-RP will not work.
Parameters: Function Error String ...
Recommended Action Dump core, and and and then restart component.
To Next Page
Loading...
