Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-467
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM6 Messages
Error Message PIM6-3-STATE_LIMIT Format: Exceeded state-limit for VRF %s - dropping
Explanation Exceeded the state-limit for VRF
Parameters: VRF ...
Recommended Action No action is required.
Error Message PIM6-3-SUBCR_INIT Format: Could not initialize shared database client
for interfaces rc=0x%x [%s]
Explanation The system is unable to do subscRIBer init to access IM shared-dbs
Parameters: Status Error, Syserror string ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-SYSMGR_DISPATCH Format: Error returned from sysmgr_dispatch(),
errno: %s
Explanation PIM6 called the system manager API which returned an error.
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-THREAD_SHUTDOWN Format: Couldn't shutdown thread %s
Explanation PIM6 failed to shut down a task thread.
Recommended Action No action is required.
Error Message PIM6-3-TIMER_CREATE Format: Couldn't create %s timer
Explanation PIM6 failed to initialize timer resource.
Parameters: Timer Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-TIMER_SET_INIT Format: Couldn't init %s active timer set
Explanation PIM6 failed to initialize timer resource.
Parameters: Timer Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM6-3-TIMER_START Format: Couldn't start %s timer
Explanation PIM6 failed to initialize timer resource.
Parameters: Timer Name ...
Recommended Action Dump core, and and and then restart component.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English