Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-53
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
BGP Messages
Error Message BGP-3-LISTEN_SOCK Format: Failed to listen on %s BGP TCP port
Explanation BGP_EXPL_SOCK_ERROR
Parameters: Address-family ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message BGP-3-LOWMEM Format: Low on heap memory
Explanation The system may be low on memory.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message BGP-3-MD5PASS Format: Cannot set MD5 password %s for peer %s
Explanation An internal software error occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message BGP-3-MQLOOP_SHUTDOWN Format: Couldn't shut down %s message queue loop
Explanation An unexpected but recoverable event has occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message BGP-3-MTSDROP Format: MTS drop failed on %s queue: %s
Explanation An unexpected but recoverable event has occurred.
Parameters: Queue name, Error ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message BGP-3-MTSRECV Format: MTS receive failed on %s queue: %s
Explanation An unexpected but recoverable event has occurred.
Parameters: Queue name, Error ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English