Dell PowerConnect 6224 - Show Snmp Filters

1236 SNMP Commands
Syntax
show snmp engineID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the SNMP engine ID.
console# show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878
show snmp filters
Use the show snmp filters command in Privileged EXEC mode to display the
configuration of filters.
Syntax
show snmp filters filtername
• filtername — Specifies the name of the filter. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.