Dell PowerConnect 6224 - Rmon Collection History

RMON Commands 1181
Default Configuration
The following parameters have the following default values:
• type type — If unspecified, the type is absolute .
•
startup direction — If unspecified, the startup direction is rising-falling .
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the following alarm conditions:
•Alarm index — 1
•Variable identifier — 1.3.6.1.2.1.2.2.1.10.5
• Sample interval — 10 seconds
• Rising threshold — 500000
• Falling threshold — 10
• Rising threshold event index — 1
• Falling threshold event index — 1
console(config)#rmon alarm 1 1.3.6.1.2.1.2.2.1.1.10.5 10
50000 10 1 1
rmon collection history
Use the rmon collection history command in Interface Configuration mode
to enable a Remote Monitoring (RMON) MIB history statistics group on an
interface. To remove a specified RMON history statistics group, use the no
form of this command. Also see the show rmon collection history command.