OSPFv3 Commands 973
show ipv6 ospf abr
This command displays the internal OSPFv3 routes to reach Area Border
Routers (ABR). This command takes no options.
Syntax
show ipv6 ospf abr
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 ospf abr
Type Router Id Cost Area ID Next
Hop Next Hop
Intf
---- -------- ---- -------- -------------------
---- -----
INTRA 3.3.3.3 10 0.0.0.1 FE80::211:88FF:FE2A:
3CB3 vlan11
INTRA 4.4.4.4 10 0.0.0.1 FE80::210:18FF:FE82:
8E1 vlan12
To Next Page
Loading...
