Dell PowerConnect 6224 - Ipv6 Multicast

96 Command Groups
IPv6 Multicast
Command Description Mode*
ipv6 pimsm (Global config) Administratively enables PIMSM for IPv6
multicast routing.
GC
ipv6 pimsm (VLAN
Interface config)
Administratively enables PIM-SM multicast
routing mode on a particular IPv6 router
interface.
IC
ipv6 pimsm bsr-border Prevents bootstrap router (BSR) messages from
being sent or received through an interface.
IC
ipv6 pimsm bsr-candidate Configures the router to announce its
candidacy as a bootstrap router (BSR).
GC
ipv6 pimsm dr-priority Sets the priority value for which a router is
elected as the designated router (DR).
IC
ipv6 pimsm hello-interval Configures the PIM-SM Hello Interval for the
specified interface.
IC
ipv6 pimsm join-prune-
interval
Configures the interface join/prune interval for
the PIM-SM router
IC
ipv6 pimsm register-
threshold
Configure the Register Threshold rate for the
RP router to switch to the shortest path.
GC
ipv6 pimsm rp-address Statically configures the RP address for one or
more multicast groups.
GC
ipv6 pimsm rp-candidate Configures the router to advertise itself as a
PIM candidate rendezvous point (RP) to the
bootstrap router (BSR).
GC
ipv6 pimsm spt-threshold Configures the Data Threshold rate for the
lasthop router to switch to the shortest path.
GC
ipv6 pimsm ssm Defines the Source Specific Multicast (SSM)
range of multicast addresses.
GC
show ipv6 pimsm Displays global status of IPv6 PIMSM and its
IPv6 routing interfaces.
PE
show ipv6 pimsm bsr Displays the bootstrap router (BSR)
information.
PE
show ipv6 pimsm interface Displays interface config parameters. PE