82 Command Groups
Spanning Tree
radius-server timeout Sets the interval for which a switch waits for a
server host to reply
GC
retransmit Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
R
show radius-servers Displays the RADIUS server settings. PE
show radius-servers
statistics
Shows the statistics for an authentication or
accounting server.
PE
source-ip Specifies the source IP address to be used for
communication with RADIUS servers.
R
timeout Sets the timeout value in seconds for the
designated radius server.
R
usage Specifies the usage type of the server. R
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
clear spanning-tree
detected-protocols
Restarts the protocol migration process on all
interfaces or on the specified interface.
PE
exit (mst) Exits the MST configuration mode and applies
configuration changes.
MC
instance (mst) Maps VLANs to an MST instance. MC
name (mst) Defines the MST configuration name. MC
revision (mst) Defines the configuration revision number. MC
show spanning-tree Displays spanning tree configuration. PE
show spanning-tree
summary
Displays spanning tree settings and parameters
for the switch.
PE
spanning tree Enables spanning-tree functionality. GC
spanning-tree auto-portfast Sets the port to auto portfast mode. IC
Command Description Mode*
To Next Page
Loading...
