Dell PowerConnect 6224 - Show Ip Pimsm Neighbor; Show Ip Pimsm Rphash

1002 PIM-SM Commands
show ip pimsm neighbor
Use the show ip pimsm neighbor command in Privileged EXEC mode to
display neighbor information for PIM-SM on the specified interface.
Syntax
show ip pimsm neighbor [ interface vlan vlan-id | all ]
• vlan-id — Valid VLAN ID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays neighbor information for PIM-SM on all
interfaces.
console#show ip pimsm neighbor all
NEIGHBOR TABLE
Interface IP Address Up Time Expiry Time
(hh:mm:ss) (hh:mm:ss)
--------- ---------------- ---------- ------------
show ip pimsm rphash
Use the show ip pimsm rphash command in Privileged EXEC mode to
display the RP router being selected from the set of active RP routers. The RP
router for the group is selected by using a hash algorithm.