Dell PowerConnect 6224 - IP Helper

Spanning Tree Commands 553
•Port-Channel — 20,000
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the MSTP instance 1 path cost for
interface 1/g9 to 4.
console(config)#interface ethernet 1/g9
console(config-if-1/g9)#spanning-tree mst 1 cost 4
spanning-tree mst port-priority
Use the spanning-tree mst port-priority command in Interface Configuration
mode to configure port priority. To return to the default port priority, use the
no form of this command.
Syntax
spanning-tree mst instance-id port-priority priority
no spanning-tree mst instance-id port-priority
• instance-ID — ID of the spanning-tree instance. (Range: 1-15)
•
priority — The port priority. (Range: 0–240 in multiples of 16)
Default Configuration
The default port-priority for IEEE MSTP is 128.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode
User Guidelines
This command has no user guidelines.