Captive Portal Commands 1091
Client Authentication Failure Traps............
Disable
Client Connection Traps........................
Disable
Client Database Full Traps.....................
Disable
Client Disconnection Traps.....................
Disable
Captive Portal User Group Commands
user group
Use the user group command to create a user group. Use the “no” form of
this command to delete a user group. The default user group (1) cannot be
deleted.
Syntax
user group
group-id
no user group
group-id
group-id
—
Group ID (Range: 1–10).
Default Configuration
User group 1 is created by default and cannot be deleted.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#user group 2
To Next Page
Loading...
