RMON Commands 1189
Example
The following example displays the RMON event table.
console> show rmon events
Index Description Type Community Owner Last time
sent
----- ----------- ---- --------- ------ -----------
--------
1 Errors Log CLI Jan 18 2005
23:58:17
2 High Broadcast Log-Trap switch Manager Jan 18 2005
23:59:48
The following table describes the significant fields shown in the display:
show rmon history
Use the show rmon history command in User EXEC mode to display RMON
Ethernet Statistics history. Also see the rmon history command.
Syntax
show rmon history
index
[throughput | errors | other] [period
seconds
]
Field Description
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event.
Can have the following values: none, log, trap, log-trap. In the case
of log, an entry is made in the log table for each event. In the case of
trap, an SNMP trap is sent to one or more management stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community
specified by this octet string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not
generated any events, this value is zero.
To Next Page
Loading...
