Dell PowerConnect 6224 - Show Isdp Interface

244 CDP Interoperability Commands
Address(es):
IP Address: 172.20.1.18
IP Address: 172.20.1.18
Capability Router IGMP
Platform cisco WS-C4948
Interface 1/g1
Port ID GigabitEthernet1/1
Holdtime 64
Advertisement Version 2
Entry last changed time 0 days 00:13:50
Version :
Cisco IOS Software, Catalyst 4000 L3 Switch Software
(cat4000 I9K91S-M), Version 12.2(25)EWA9, RELEASE
SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 21-Mar-07 12:20 by tinhuang
show isdp interface
The show isdp interface command displays ISDP settings for the specified
interface.
Syntax
show isdp interface { all | ethernet interface }
• all — Show ISDP settings for all interfaces.
•
interface — Specifies a valid interface. The full syntax is unit/port.
Default Configuration
There is no default configuration for this command.