Dell PowerConnect 6224 - Name

504 RADIUS Commands
Default Configuration
The message authenticator attribute is enabled by default.
Command Mode
Radius mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-auth-radius)#msgauth
name
Use the name command to assign a name to a RADIUS server. Use the "no"
form of this command to reset the name to the default.
Syntax
name servername
no name
servername — The name for the RADIUS server (Range: 1 - 32 characters).
Default Configuration
The default RADIUS server name is Default-RADIUS-Server.
Command Mode
Radius mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#radius-server host acct 3.2.3.2
console(Config-acct-radius)#name acct777