AAA Commands 203
console#show users login-history
Login Time Username Protocol Location
-------------------- --------- --------- -----------
----
Jan 19 2005 08:23:48 Bob Serial
Jan 19 2005 08:29:29 Robert HTTP 172.16.0.8
Jan 19 2005 08:42:31 John SSH 172.16.0.1
Jan 19 2005 08:49:52 Betty Telnet 172.16.1.7
username
Use the username command in Global Configuration mode to add a new user
to the local users database. To remove a user name use the no form of this
command.
Syntax
username
name
password
password
[level
level
] [encrypted]
no username
name
•
name
— The name of the user. (Range: 1-20 characters)
•
password
— The authentication password for the user. (Range: 8-64
characters. This value can be 0 [zero] if the no passwords min-length
command has been executed.)
•
level
— The user level. Level 0 can be assigned by a level 15 user to another
user to suspend that user’s access. (Range: 0-15)
•
encrypted
— Encrypted password entered, copied from another switch
configuration.
Default Configuration
No user name is defined.
The default privilege level is 1.
To Next Page
Loading...
