OSPF Commands 919
AS Border Router Count..........................
.......0
Area LSA
Count........................................ .1
IP
Address..............................................
2.2.2.2
OSPF Interface
Events...................................1
Virtual
Events......................................... 0
Neighbor
Events........................................ 0
External LSA
Count..................................... 0
show ip ospf neighbor
Use the show ip ospf neighbor command in Privileged EXEC mode to display
information about OSPF neighbors. The information below only displays if
OSPF is enabled and the interface has a neighbor.
Syntax
show ip ospf neighbor [interface vlan
vlan-id
] [
ip-address
]
•
vlan-id
— Valid VLAN ID.
•
ip-address
— Valid IP address of the neighbor.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
To Next Page
Loading...
