Dell PowerConnect 6224 - Show Ip Vrrp Interface

Virtual Router Redundancy Protocol Commands 1049
Example
The following example displays VRRP’s enabled status.
console#show ip vrrp
Admin Mode.....................................
Enable
Router Checksum Errors......................... 0
Router Version Errors.......................... 0
Router VRID Errors............................. 0
show ip vrrp interface
Use the show ip vrrp interface command in Privileged EXEC mode to display
all configuration information and VRRP router statistics of a virtual router
configured on a specific interface.
Syntax
show ip vrrp interface vlan vlan-id vr-id
• vlan-id — Valid VLAN ID.
•
vr-id — The virtual router identifier. (Range: 1-255)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays all configuration information about the
VLAN 15 virtual router.
console#show ip vrrp interface vlan 7 1