84 Command Groups
Switchport Voice
TACACS+
spanning-tree mst priority Configures the switch priority for the specified
spanning tree instance.
GC
spanning-tree pathcost
method
Configures the spanning tree default pathcost
method
GC
spanning-tree portfast Enables PortFast mode. IC
spanning-tree portfast
bpdufilter default
Discards BPDUs received on spanningtree ports
in portfast mode.
GC
spanning-tree portfast
default
Enables Portfast mode on all ports. GC
spanning-tree port-priority Configures port priority. IC
spanning-tree priority Configures the spanning tree priority. GC
spanning-tree tcnguard Prevents a port from propagating topology
change notifications.
IC
spanning-tree transmit
hold-count
Set the maximum number of BPDUs that a
bridge is allowed to send within a hello time
window (2 seconds).
GC
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
switchport voice detect
auto
Enables the VoIP Profile on all the interfaces of
the switch.
GC/IC
show switchport voice Displays the status of auto-voip on an interface
or all interfaces.
PE
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
key Specifies the authentication and encryption key
for all TACACS communications between the
device and the TACACS server.
TC
Command Description Mode*
To Next Page
Loading...
