Dell PowerConnect 6224 - Show Ip Pimsm Interface

850 Multicast Commands
Example
console#show ip pimsm bsr
BSR Address....................................
1.1.1.1
BSR Priority................................... 20
BSR Hash Mask Length........................... 10
Next bootstrap message(hh:mm:ss)...............
00:00:11
Next Candidate RP advertisement(hh:mm:ss)......
00:00:00
show ip pimsm interface
The show ip pimsm interface command displays interface config parameters.
If no interface is specified, all interfaces are displayed. This command
deprecates the show ip pimsm interface stats command.
Syntax
show ip pimsm interface [ vlan vlan-id ]
• vlan-id — A valid VLAN ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ip pimsm interface vlan 3