78 Command Groups
mark cos Marks all packets for the associated traffic
stream with the specified class of service value
in the priority field of the 802.1p header.
PCM
C
mark ip-dscp Marks all packets for the associated traffic
stream with the specified IP DSCP value.
PCM
C
mark ip-precedence Marks all packets for the associated traffic
stream with the specified IP precedence value.
PCM
C
match class-map Adds add to the specified class definition the
set of match conditions defined for another
class.
CMC
match cos Adds to the specified class definition a match
condition for the Class of Service value.
CMC
match destination-address
mac
Adds to the specified class definition a match
condition based on the destination MAC
address of a packet.
CMC
match dstip Adds to the specified class definition a match
condition based on the destination IP address of
a packet.
CMC
match dstip6 adds to the specified class definition a match
condition based on the destination IPv6 address
of a packet.
v6CM
C
match dstl4port Adds to the specified class definition a match
condition based on the destination layer 4 port
of a packet using a single keyword, or a numeric
notation.
CMC
match ethertype Adds to the specified class definition a match
condition based on the value of the ethertype.
CMC
match ip6flowlbl Adds to the specified class definition a match
condition based on the IPv6 flow label of a
packet.
v6CM
C
match ip dscp Adds to the specified class definition a match
condition based on the value of the IP DiffServ
Code Point (DSCP) field in a packet.
CMC
match ip precedence Adds to the specified class definition a match
condition based on the value of the IP.
CMC
Command Description Mode*