Dell PowerConnect 6224 - Show Ipv6 Pimsm Neighbor

762 IPv6 Multicast Commands
BSR Border.....................................
Disabled
show ipv6 pimsm neighbor
Use the show ipv6 pimsm neighbor command to display IPv6 PIMSM
neighbors learned on the routing interfaces.
Syntax
show ipv6 pimsm neighbor [ all | interface vlan vlan-id ]
• vlan-id —A valid VLAN ID value.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimsm neighbor all
Slot/Port...................................... vlan
6
Neighbor Address...............................
FE80::200:FF:FE00:33
Up Time (hh:mm:ss).............................
00:00:12
Expiry Time (hh:mm:ss).........................
00:01:34
DR Priority.................................... 0