Serviceability Tracing Packet Commands 1217
Usage Guidelines
There are no usage guidelines for this command.
Example
The following example displays.
console#debug ping packet
debug rip
Use the debug rip command to enable tracing of RIP requests and responses.
Use the “no” form of this command to disable tracing of RIP requests and
responses.
Syntax
debug rip packet
no debug rip packet
Default Configuration
Display of RIP traces is disabled by default.
Command Mode
Privileged EXEC mode.
Usage Guidelines
There are no usage guidelines for this command.
Example
console#debug rip packet
debug sflow
Use the debug sflow command to enable sFlow debug packet trace. Use the
“no” form of this command to disable sFlow packet tracing.
To Next Page
Loading...
