DHCP Snooping Commands 259
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip dhcp snooping
console(config-if-vlan1,2,3)#ip dhcp snooping
ip dhcp snooping binding
Use the ip dhcp snooping binding command to configure a static DHCP
Snooping binding. Use the “no” form of this command to remove a static
binding.
Syntax
ip dhcp snooping binding
mac-address
vlan
vlan-id ip-address
interface
interface
no ip dhcp snooping binding mac-address
•
mac-address
—The client's MAC address.
•
vlan-id
—The number of the VLAN the client is authorized to use.
•
ip-address
—The IP address of the client.
•
interface
—The interface on which the client is authorized. The form is
unit/port.
Default Configuration
There are no static DHCP snooping bindings by default.
Command Mode
Global Configuration mode
To Next Page
Loading...
