Dell PowerConnect 6224 - Show Process Cpu

1310 System Management Commands
Warm Restart Ready............................. Yes
Copy of Running Configuration to Backup Unit:
Status...................................... Stale
Time Since Last Copy........................ 0 days
4 hrs 53 mins 22 secs
Time Until Next Copy........................ 28
seconds
Unit NSF Support
---- -----------
1 Yes
2 Yes
3 Yes
show process cpu
Use the show process cpu command to check the CPU utilization for each
process currently running on the switch.
Syntax
show process cpu
Command Mode
Privileged EXEC
Default Configuration
This command has no default configuration.
User Guidelines
No specific guidelines.