Captive Portal Commands 1089
show captive-portal configuration status
Use the show captive-portal configuration status command to display
information about all configured captive portal configurations or about a
specific captive portal configuration.
Syntax
show captive-portal configuration [
cp-id
] status
•
cp-id
—Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration status
CP ID CP Name Mode Protocol
Verification
----- --------------- -------- -------- ---------
---
1 cp1 Enable https Guest
2 cp2 Enable http Local
3 cp3 Disable https Guest
console#show captive-portal configuration 1 status
CP ID.......................................... 1
CP Name........................................ cp1
To Next Page
Loading...
