556 Spanning Tree Commands
spanning-tree portfast bpdufilter default
The spanning-tree portfast bpdufilter default command discards BPDUs
received on spanning-tree ports in portfast mode. Use the “no” form of the
command to disable discarding.
Syntax
spanning-tree portfast bpdufilter default
no spanning-tree portfast bpdufilter default
Default Configuration
This feature is disabled by default.
Command Mode
Global Configuration mode
Usage Guidelines
There are no usage guidelines for this command.
Example
The following example discards BPDUs received on spanning-tree ports in
portfast mode.
console#spanning-tree portfast bpdufilter default
spanning-tree portfast default
Use the spanning-tree portfast default command to enable Portfast mode
only on access ports. Use the “no” form of this command to disable Portfast
mode on all ports.
Syntax
spanning-tree portfast default
no spanning-tree portfast default
To Next Page
Loading...
