Dell PowerConnect 6224 - Show Ip Vrrp Interface Stats

Virtual Router Redundancy Protocol Commands 1051
Syntax
show ip vrrp interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays all configuration information about the
virtual router on the selected interface.
console#show ip vrrp interface brief
Interface VRID IP Address Mode State
--------- ---- -------------- ------ ------------
vlan1 2 0.0.0.0 Disable Initialize
vlan2 5 192.168.5.55 Enable Initialize
show ip vrrp interface stats
Use the show ip vrrp interface stats command in User EXEC mode to display
the statistical information about each virtual router configured on the switch.
Syntax
show ip vrrp interface stats vlan vlan-id vr-id
• vlan-id — Valid VLAN ID.
•
vr-id — The virtual router identifier. (Range: 1-255)
Default Configuration
This command has no default configuration.