Dell PowerConnect 6224 - Show Snmp Groups

SNMP Commands 1237
Example
The following examples display the configuration of filters with and without a
filter name specification.
console # show snmp filters
Name OID Tree Type
------------------- ---------------------------------
-
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
user-filter2 1.3.6.1.2.1.2.2.1.*.1
Included
console # show snmp filters user-filter1
Name OID Tree Type
------------------- ---------------------------------
-
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
show snmp groups
Use the show snmp groups command in Privileged EXEC mode to display
the configuration of groups.
Syntax
show snmp groups [ groupname ]
• groupname — Specifies the name of the group. (Range: 1-30)