Dell PowerConnect 6224 - IGMP Snooping

Link Dependency Commands 397
Command Mode
Global Configuration mode
User Guidelines
No specific guidelines
Example
console(config)#no link-dependency group 1
add ethernet
Use the add ethernet command to add member Ethernet port(s) to the
dependency list.
Syntax
add ethernet intf-list
• intf-list — List of Ethernet interfaces. Separate nonconsecutive ports with
a comma and no spaces. Use a hyphen to designate the range of ports.
(Range: Valid Ethernet interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-depend-1)#add ethernet 1/g1