1336 System Management Commands
show version
Use the show version command in User EXEC mode to displays the system
version information.
Syntax
show version [
unit
]
•
unit
— The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a system version (this version number is only
for demonstration purposes).
console>show version
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
-----------------------------------------------------
-------------
unit image1 image2 current-active next-
active
-----------------------------------------------------
------------
To Next Page
Loading...
