Dell PowerConnect 6224 - Ipv6 Mld-Proxy

IPv6 Routing Commands 773
no ipv6 mld last-member-query-interval
• last-member-query-interval — The last member query interval (Range:
0–65535 milliseconds).
Default Configuration
The default last member query interval is 1 second.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld last-member-query-
interval 5000
ipv6 mld-proxy
Use the ipv6 mld-proxy command to enable MLD Proxy on the router. To
enable MLD Proxy on the router, you must also enable multicast forwarding.
Also, ensure that there are no other multicast routing protocols enabled on
the router. Use the “no” form of this command to disable MLD Proxy.
Syntax
ipv6 mld-proxy
no ipv6 mld-proxy
Default Configuration
MLD Proxy is disabled by default.
Command Mode
Interface Configuration (VLAN) mode.