458 QoS Commands
User Guidelines
This command has no user guidelines.
Example
The following example displays how to set the DiffServ operational mode to
active.
console(Config)#diffserv
drop
Use the drop command in Policy-Class-Map Configuration mode to specify
that all packets for the associated traffic stream are to be dropped at ingress.
Syntax
drop
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to specify that matching packets are to
be dropped at ingress.
console(config-policy-classmap)#drop
To Next Page
Loading...
