Dell PowerConnect 6224 - Show Ip Access-Lists

ACL Commands 213
User Guidelines
Command fails if the new name is the same as the old one.
Example
The following example shows the mac access-list extended rename
command.
console(config)#mac access-list extended rename DELL1
DELL2
show ip access-lists
Use the show ip access-lists command in Privileged EXEC mode to display
access lists applied on interfaces and all rules that are defined for the access
lists.
Syntax
show ip access-lists accesslistname
• accesslistname — The name used to identify the ACL. The range is 1-31
characters.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays IP ACLs configured on a device.
console#show ip access-lists
Current number of ACLs: 2 Maximum number of ACLs: 100