Dell PowerConnect 6224 - Set Description

System Management Commands 1305
Management switch has unsaved changes.
Would you like to save them now? (y/n)n
Configuration Not Saved!
Are you sure you want to reload the switch? (y/n) y
Reloading management switch 1.
set description
Use the set description command in Stack Global Configuration mode to
associate a text description with a switch in the stack.
Syntax
set description unit description
• unit — The switch identifier. (Range: 1–12)
•
description — The text description. (Range: 1–80 alphanumeric
characters)
Default Configuration
This command has no default configuration.
Command Mode
Stack Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays
console(config)#stack
console(config-stack)#set description 1 “unit 1"