1098 Clock Commands
Examples
The following example shows the status of the SNTP.
console#show sntp status
Client Mode: Unicast
Last Update Time: MAR 30 21:21:20 2009
Unicast servers:
Server Status Last response
--------- ----------- ----------------------
----
192.168.0.1 Up 21:21:20 Mar 30 2009
sntp authenticate
Use the sntp authenticate command in Global Configuration mode to
require server authentication for received Network Time Protocol (NTP)
traffic. To disable the feature, use the no form of this command.
Syntax
sntp authenticate
no sntp authenticate
Default Configuration
No authentication.
Command Mode
Global Configuration mode
User Guidelines
The command is relevant for both Unicast and Broadcast.
To Next Page
Loading...
