Dell PowerConnect 6224 - Show Ip Rip Interface

Routing Information Protocol Commands 1027
Host Routes Accept Mode........................
Enable
Global route changes........................... 0
Global queries................................. 0
Default Metric................................. 12
Default Route Advertise........................ 0
Redistributing.................................
Source.........................................
Connected
Metric......................................... 2
Distribute List................................ Not
configured
Redistributing.................................
Source......................................... ospf
Metric......................................... 10
Match Value....................................
'nssa-external 1'
Distribute List................................ Not
configured
show ip rip interface
Use the show ip rip interface command in Privileged EXEC mode to display
information related to a particular RIP interface.
Syntax
show ip rip interface vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.