Dell PowerConnect 6224 - Ip Dhcp Snooping Database

260 DHCP Snooping Commands
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip dhcp snooping binding
00:00:00:00:00:01 vlan 10 10.131.12.134 interface
1/g1
ip dhcp snooping database
Use the ip dhcp snooping database command to configure the persistent
storage location of the DHCP snooping database. This can be local to the
switch or on a remote machine.
Syntax
ip dhcp snooping database { local | tftp:// hostIP / filename }
• hostIP —The IP address of the remote host.
•
filename —The name of the file for the database on the remote host.
Default Configuration
The database is stored locally by default.
Configuration Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the storage location of the snooping
database as local.
console(config)#ip dhcp snooping database local