64 Command Groups
CDP Interoperability
show bridge multicast
address-table
Displays Multicast MAC address table
information.
PE
show bridge multicast
filtering
Displays the Multicast filtering configuration. PE
show ports security Displays the port-lock status. PE
show ports security
addresses
Displays current dynamic addresses in locked
ports.
PE
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
clear isdp counters Clears the ISDP counters. PE
clear isdp table Clears entries in the ISDP table. PE
isdp advertise-v2 Enables the sending of ISDP version 2 packets
from the device.
GC
isdp enable Enables ISDP on the switch. GC/IC
isdp holdtime Configures the hold time for ISDP packets that
the switch transmits.
GC
isdp timer Sets period of time between sending new ISDP
packets.
GC
show isdp Displays global ISDP settings. PE
show isdp interface Displays ISDP settings for the specified
interface.
PE
show isdp entry Displays ISDP entries. PE
show isdp neighbors Displays the list of neighboring devices. PE
show isdp traffic Displays ISDP statistics. PE
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
To Next Page
Loading...
